Cutting and welding the frames after transferring the full size patterns supplied onto a solid floor
Roberts 370 (Multi Chine Steel)
|
This series of photographs are courtesy of David from Barcelona, Spain. Definitely the beginnings of another quality boat judging by the construction so far. |
| Page 1...... | Making and standing the frames |
| Page 2...... | Plating the hull |
Cutting and welding the frames after transferring the full size patterns
supplied onto a solid floor
Above and below show a number of frames
Note the headstock tacked onto the smallest frame. (Frame 1)
This photo shows frame 1 standing in position on it's headstock which sits on
the
strongback which carries all the frames
All frames in position.
The chine stringers have been added.
Detail of the leading edge of the keel where it attaches to the profile bar
Detail of the bow reinforcement gussets.